|
Description:
Supersand Bond is a unique mixture of polymer binders and calibrated sand available in Beige or Slate Grey. The installation of Supersand Bond is almost identical to using regular paver joint sand, except for the application of water. Once Supersand Bond sets, it becomes very firm and locks between the paver joints. This firm bond maintains pavers securely in place, being equally effective on both horizontal and sloped surface.
Features:
• Can be used for paver joints up to a maximum of 1 inch.
• Helps prevent weed sprouting and the damages caused by insects.
• Helps prevent erosion due to climatic condition, such as wind, rain and freezing.
• Starts to set as soon as water is sprayed. Fast setting.
• Sets at above freezing temperature (0° C - 32° F)
• Can be applied even if rain is expected (minimum 1 hour after sand installation).
• Does not stain concrete paving stones.
• Intact pallets can be stored outside.
PLEASE NOTE!
Do not apply on wet or damp surface since bonding action will cause Supersand Bond to stick on surface and avoid proper sliding in joint. Do not use if rain is expected within 1 hour. Avoid excessive watering or flooding of paved surfaces. When installing pavers around an underground pool a slope of 1/8 inch per linear foot away from the pool is mandatory. All paver surfaces must have a drainage slope for the Supersand Bond to work at its optimum. For the pool coping blocks it is mandatory to use mortar in the joints. For the rest of the paver installation around the pool, you can use Supersand Bond.
|
Description:
Gator Dust is a unique mixture of polymer binders and calibrated crushed stone available in two colors STONE GREY and SAHARA BEIGE. Once Gator Dust sets, it becomes very firm and locks between the natural stone joints. This firm bond maintains the natural stones securely in place, being equally effective on both horizontal and sloped surfaces.
PLEASE NOTE:
Gator Dust becomes very firm but will crack if the crushed stone base has movement. By following the installation instructions carefully, you will obtain a very hard jointing material. It should be noted that Gator Dust will continue to harden over time. Do not apply on wet or damp surface since bonding action will cause Gator Dust to stick on surface and avoid proper sliding in joint. Do not use if rain is expected within 24 hours. Avoid excessive watering or flooding of stone areas. When installing natural stones around an underground pool a slope of 1/8 inch per linear foot away from the pool is mandatory. All natural stones surfaces must have a drainage slope for the Gator Dust to work at its optimum. For the pool coping blocks it is mandatory to use mortar in the joints. For the rest of the natural stones installation around the pool, you can use Gator Dust.
|
